Retaining wall block face options: LimeStone, FieldStone, Ashlar and CobbleStone, each shown plain and stainedWhy Matching Wall Textures Matters

A retaining wall rarely stands alone. It sits next to screen walls, sound walls, building facades, entry monuments, and landscape walls that were often designed first. When the retaining wall looks like it came from a different job, the whole site looks unfinished.

LondonBoulder offers four face styles, each in natural and stained finishes. That range gives designers, contractors, and precast producers a real chance to match the walls and structures already on a site, instead of settling for whatever block is available.

The LondonBoulder Face Lineup

Each face has its own pattern and scale, so each one pairs naturally with a different kind of nearby structure.

Face What it looks like Best match for
Ashlar (new) Squared cut stones of mixed sizes laid in broken courses Precast screen walls, sound walls and fence panels with a cut stone or ashlar pattern
LimeStone Long rectangular blocks with a rough, weathered limestone surface Cut limestone buildings, split face masonry and formal commercial sites
FieldStone Rounded, irregular stones in a random pattern Natural stone landscaping, boulder walls and rustic or park settings
CobbleStone Smaller rectangular stones in a tight, repeating pattern Stone veneer, cobble accents and walls that need a finer, busier texture

Every face is also available stained, which adds color variation on top of the texture. The stained finishes range from a warm red-brown on Limestone to multi-tone gray, tan, and brown on FieldStone, and soft tan and gray blends on Ashlar and CobbleStone.

Boulder face retaining wall stepping down a sloped corner lot beside a substation screen wall, ending at a grass covered slopeReal Example: An Ashlar Wall That Matched the Panels

At an Alliant Energy substation in Dubuque, Iowa, a tall precast post-and-panel screen wall with a cut stone pattern already surrounded the site. Below it, the grade dropped toward a public sidewalk, and a retaining wall was needed.

The owner chose the LondonBoulder Ashlar face because its squared, cut stone look matched the panels. The terraced gravity wall steps down with the grade, turns the substation corner, and creates raised gravel beds along the sidewalk. The same precast producer supplied both the screen wall panels and the retaining wall.

“Went well and looks great with our post and panel wall. Cool job overall!” Adam M., Precast Producer

The texture match is what sold the job. For producers who already cast textured panels, that is the opportunity: offer a retaining wall that matches what you are already selling.

Natural or Stained: Matching Color as Well as Texture

Texture gets a wall close to a match. Color finishes the job.

  • Natural faces keep the concrete’s gray tone. They pair well with uncolored precast panels, concrete structures, and modern sites where a clean, consistent look matters most.
  • Stained faces add warm, multi-tone color that reads more like real stone. They pair well with natural stone buildings, colored or stained precast panels, and landscaped sites where the wall should blend into its surroundings.

If the nearby structure is stained or colored, a stained LondonBoulder face will usually match more closely than a natural one.

How to Match a Face Style on Your Next Project

  1. Photograph what is already there. Take close and wide photos of the panels, facade, or stone the wall will sit next to, in daylight.
  2. Match the pattern first. Squared cut stone points to Ashlar, long rectangular blocks to Limestone, rounded stone to Fieldstone, and small repeating stones to Cobblestone.
  3. Then match the color. Decide between a natural or stained finish based on the nearby structure’s tone.
  4. Compare a sample on site. Set a sample unit next to the existing wall and check it in morning and afternoon light before ordering.
  5. Bring the match into the bid. Show the owner the side-by-side photos. A matching look is often what turns a quote into a signed job.

Find the Face That Fits Your Project

Whether you are matching a precast panel wall, a stone building, or a natural landscape, LondonBoulder has a face built to blend in. Explore all of the face textures, or contact LondonBoulder to talk through a match for your next job. Precast producers interested in offering LondonBoulder can learn more about becoming a producer.